Beauty
These 12 Myths About Washing Your Face Are Debunked By Professionals
There are guidelines when it comes to personal hygiene, especially when washing your face is involved. The excess of skin care regimens out there makes it extremely difficult to find one that works for your face. The amount of conflicting information and rumors around skin care routines is frustrating to say the least, so let’s get things straight.
With a few expert opinions, we’re here to make it slightly less confusing to find a routine. These popular myths that you hear so often are debunked by accredited dermatologists. You might be surprised to find that you’ve been doing it wrong this whole time. Let’s clear up the myths around clearing up your face!

Myth Number 1: Don’t Wash your face in the shower.
A leading professional in the field of dermatology confirms that the idea of avoiding washing your face in the shower is a total myth. It turns out the hot water from the shower actually helps to give your pores a deeper and more efficient clean.
Myth Number 2: Wash your face two times a day.
Washing your face once before you go to bed to remove dirt that’s built up during the day is perfectly normal. In fact, it depends on your skin type and how oily it is. The number of times you need to wash your face depends on your individual needs.
Myth Number 3: Twice the wash with an oil and water-based cleanser is a must.
A water-based cleanser is great for all skin types. It is true that an oil-based cleanser removes certain make-up better, but you always want to follow it up with a water-based cleanser. So there really is no need for both to effectively clean your face.
Myth Number 4: If your face burns and is tight, then the cleanser is working.
The old addage “No pain, no gain” really shouldn’t be applied to your face. The sensitive balance of natural chemicals in your skin will often times be burned and irritated by acidic cleansers. This can lead to further skin problems. If something burns, you should definitely consult a dermatologist before you continue use.

Myth Number 5: Soap and water is all you need for your face routine.
Your face is unlike any other skin on your body. Regular soap is for regular things. Treat your skin with care and give it the essential oils and protection it needs.
Myth Number 6: The best way to clean deep in your pores is by scrubbing.
Scrubbing your face can lead to further allergic reactions or irritations. The skin adapts to the friction and actually creates a vicious cycle of skin problems.
Myth Number 7: If you don’t wash your face everyday, your skin will breakout.
Hormones and genetics also contribute to facial acne. You don’t necessarily need to wash your face everyday. Again you should do what’s best for your skin type.
Myth Number 8: Don’t use a washcloth when you dry your face.
If you use a regular washcloth that is used for everything on your face, it can be problematic. However, if you use a washcloth designated for your face it is less likely to have harmful bacteria.

Myth Number 9: All your face needs at night is a make-up removal product.
Using a make-up removal product is necessary, but not all you should do. Make-up often times leaves a trail of residue behind. You should wash your face as well to remove all of the dirt and oil.
Myth Number 10: You don’t need to wash your hands before washing your face.
Even if your hands don’t feel dirty they are. You use your hands all the time for everything. To avoid skin or eye irritation wash your hands before you wash your face.
Myth Number 11: You don’t need to remove the make-up before you wash your face.
Make-up is thick and has chemicals and pigments that some cleansers just can’t remove. Professionals recommend removing the make-up as a first step.
Myth Number 12: Any cleanser will work for your skin type.
You can avoid a lot of redness and irritation by finding the right type of cleanser for your skin. Every person has different oils and chemicals on their face, so it’s important to find the right one for you. A dermatologist can help finding one for you.
Beauty
What a Dark Edge Around an Old Silver Filling Means
A dark line around an old silver filling is common, and it does not by itself mean the filling has failed. The discoloration usually comes from the metal reacting slowly with saliva at the edge, a different process than new decay forming beneath it.
Why the Metal Darkens at the Margin
Amalgam blends silver, tin, copper and a mercury into a filling material that hardens inside the tooth. Over years of chewing and contact with saliva, the outer edge of that metal can tarnish and pick up a gray or black tint, much the way silverware darkens with age. That surface change happens on its own and does not necessarily mean the seal between the filling and the tooth has broken.
What matters is whether the tooth underneath the filling has stayed intact. A tarnished edge on a filling that still fits tightly is a cosmetic detail. A tarnished edge next to a soft spot, a gap, or a rough ridge is a different situation. A dentist needs to look at it directly, not guess from the color alone.
How Long an Amalgam Filling Is Supposed to Last
Silver fillings often last many years, and how long one holds up depends on its size, the bite on that tooth and daily care. A filling in a molar that takes heavy chewing pressure every day may wear differently than one in a tooth that does less work. Age alone does not tell a dentist whether a filling still fits the tooth the way it did on day one.
That same review lists a few concrete signs to watch for beyond color. A rough or sharp edge you can feel with your tongue, food that keeps catching at the same spot, or a filling that feels loose when you bite down. Those point to an actual change in the material itself, not just its surface.
Why the Color Alone Rarely Settles It
Dentists are generally cautious about pulling out a filling that is otherwise doing its job. One patient guide to fillings notes that dentists are advised against replacing a filling for appearance alone. Removing sound filling material usually means removing some healthy tooth structure along with it. A dark edge, on its own, is cosmetic. Replacing a filling that still seals the tooth trades one small issue for a larger one: a bigger hole to refill.
This is why an exam matters more than a mirror. A dentist checks the margin with an explorer to feel for a ledge or a gap. Then an x-ray shows whether decay has started to form in the layer between the metal and the tooth, something a dark line on the surface cannot show on its own.
What the X-ray Actually Decides
An x-ray of an old filling is looking for one thing: a shadow at the margin where the seal has opened. That gap is where bacteria get underneath the metal and decay starts to spread, invisible from the surface. If the image is clean and the filling still feels solid, it can usually stay in place, color and all, until it is due for its next routine check. A gap or dark area spreading under the metal is what leads to a new filling or a crown. The stain by itself usually does not.
It is reasonable to let a stained, intact filling wait for your next scheduled cleaning. Call sooner if the tooth has started catching food in a new way, or if a rough edge has appeared where there wasn’t one before. The same goes for pressure or sensitivity when you bite down on that side.
When a Filling Is Actually Replaced
Once decay or a broken seal shows up on the x-ray, the tooth usually needs more than a patch. Depending on how much of the tooth is still sound, a dentist may place a new filling or recommend a crown that covers and protects what is left of the tooth structure. That decision is made case by case, after the dentist has seen what the x-ray shows underneath the metal.
For a family practice handling that kind of exam day to day, this is routine work. Smiles By Design, a general dentistry practice in Heber City, Utah, lists general dental appointments, including the exams and x-rays behind decisions like this one, on its services page at smilesbydesignutah.com.
The Decision That Actually Needs Making
A dark edge on an old silver filling is worth mentioning at your next cleaning. It rarely calls for an emergency visit on its own. The tooth underneath, confirmed by an x-ray rather than a guess, is what decides whether that filling stays or gets replaced.
Beauty
Jaw Clicks But Doesn’t Hurt: Ignore It or Get It Looked At?
A clicking jaw with no pain usually doesn’t call for treatment right away. The click is simply the sound of the disc inside the joint shifting as the jaw opens and closes. Many people live with it for years without it ever becoming a problem. The real decision is whether to keep watching it or mention it at a dental visit.
What’s actually making the sound
The clicking sound has a straightforward mechanical explanation. Understanding it is the first step in knowing whether to just keep watching it or get it looked at. The jaw joint, the temporomandibular joint, sits just in front of each ear and works like a hinge with a small cushioning disc inside it. When that disc slips slightly out of its usual position, it snaps back as the mouth opens wider. That shift produces the pop or click people notice when they yawn, chew, or talk for a while. It’s a mechanical sound, not a sign of damage by itself. A joint can click for years with the disc simply riding a little differently than it used to. The surrounding muscles and ligaments adapt around it, often without ever causing discomfort.
Why no pain changes the calculus
A joint can adapt to a shifted disc without discomfort. Because of that, pain, not the click itself, is usually what turns a joint sound into a problem worth addressing. Clicking alone, without soreness, without the jaw catching or locking, and without morning stiffness, usually means the joint has found a stable way of moving. It’s a slightly unusual pattern, but a stable one. Dentists who see these joints regularly generally don’t treat sound in isolation. Intervening on a joint that isn’t causing trouble can introduce new issues. A bite guard, for example, can change how the teeth meet when nothing needed correcting. For a click without pain, the usual approach is to watch it rather than act on it.
What would move it from “watch” to “check”
Watching is the right call until the picture changes. A few specific developments are worth paying attention to: soreness around the ear or jaw muscles, the jaw catching partway open or closed, and discomfort when chewing tougher foods. Headaches clustering around the temples on the same side as the click are worth noting too. Any of those marks a different picture than sound alone. A bite that suddenly feels off is also worth mentioning at a regular dental visit. So is a sense that the teeth meet differently than they used to. There’s no need to wait for it to resolve on its own. None of these on their own mean something serious is happening, but together they’re the kind of pattern worth having a dentist look at.
What a visit can tell you that waiting can’t
A dental visit exists to sort through exactly those kinds of changes. A dentist examining a clicking jaw checks range of motion and listens for where in the movement the click occurs. They also ask about habits that load the joint, like clenching, teeth grinding, or chewing gum for long stretches. A click that happens early in opening often has a different cause than one that happens near full opening. The two can call for different approaches. That’s why an exam replaces guessing with an actual look at the joint. Farmington patients who want that kind of evaluation can see what’s involved through the TMJ page at MVP Dental. It lays out how the joint is assessed and what options exist if treatment turns out to be warranted. Seeing a dentist about a clicking jaw doesn’t commit anyone to treatment.
The habits that matter regardless
Whether or not a visit ever leads to treatment, a few habits help the joint either way. Cutting back on wide yawns and avoiding all-day gum chewing are reasonable steps for almost anyone. So is noticing whether stress shows up as a clenched jaw during the day. That holds whether the jaw clicks or not. These aren’t fixes in themselves, but they reduce the load on a joint that’s already working a little differently than average. They also cost nothing to try. For a jaw that’s only clicking, that kind of low-effort attention is often enough while the situation is simply being watched.
Making the call
Put together, a click without pain is information, not an emergency. Most people can reasonably choose to keep an eye on it rather than schedule a visit specifically for it. The decision tips toward getting it checked the moment anything else joins the click. That includes discomfort, limited opening, or a change in how the bite feels. Until then, noticing the sound and tracking whether anything changes is a reasonable way to handle it.
Beauty
Crowded Teeth or a Bad Bite: The Difference That Decides Invisalign or Braces
Crowding is a space problem: there is not enough room for every tooth to sit flat. A bite problem is a position problem: the upper and lower teeth do not meet the way they should when the jaw closes. That distinction, more than looks or convenience, usually decides whether Invisalign or traditional braces is the better tool for the job.
Crowding Is About Space, Not Just Appearance
Crowded teeth happen when the jaw does not have enough length to hold every tooth in its proper position. Teeth twist, overlap, or push forward out of line as a result. It is the most common reason adults ask about straightening their teeth. Cases range from a single tooth sitting slightly rotated to a front row that looks stacked two deep. Mild to moderate crowding is often a matter of creating small amounts of space and guiding teeth into it in a fairly predictable sequence.
That predictability matters because it is exactly the kind of movement a series of clear aligner trays is built to handle. Each tray in an Invisalign series nudges teeth a small, controlled distance before the next tray takes over. That gradual, tooth-by-tooth shifting suits what crowding usually requires.
A Bite Problem Is a Different Kind of Puzzle
Crowding explains why teeth overlap or twist. It does not explain why some mouths do not meet correctly when the jaw closes, and that is a separate problem with its own fix. An overbite, underbite, crossbite, or open bite is not really about individual teeth being out of place. It is about how the upper and lower arches meet, or fail to meet, when a person closes their mouth. Some of this is dental, meaning the teeth themselves are tipped or tilted wrong. Some of it involves the jaws, which is a more structural issue. The two causes can look similar from the outside but call for different amounts and directions of force to correct.
Traditional braces bond a bracket to each tooth and thread a wire through them. That setup can apply pressure in more directions at once, including the rotational and vertical movements that many bite corrections need. That is part of why braces have historically been the more dependable option for a true bite problem, as opposed to simple crowding. Aligner technology has improved, but that history still holds for the harder cases.
Why the Line Between the Two Isn’t Always Clean
Crowding and bite problems are described here as two separate categories, but few mouths fit neatly into one or the other. A patient with crowded front teeth may also have a mild overbite. Someone with a crossbite on one side might otherwise have well-spaced teeth. Modern aligner trays can include small tooth-colored attachments that give them more grip for rotating or tipping a tooth. That has pushed the range of what Invisalign can treat well beyond crowding alone. But the overlap cuts both ways. A case that looks like simple crowding can carry a bite component that still needs addressing. That is why mixed cases get sorted out with a closer look rather than a guess at which category a mouth falls into.
This is why the honest answer to “which one do I need” is rarely a guess made from a mirror. It takes a look inside the mouth, not just at it.
How That Look Actually Happens
A digital scan of the teeth and bite gives a far more exact picture than a visual check alone. It shows how the arches line up and where the crowding or the bite discrepancy actually sits. Dr. A.J. Proctor and Dr. Nathan Tanner use an iTero intraoral scanner for this kind of planning. It replaces the old putty impression with a digital model that can be reviewed on a screen during the same visit. Patients who need a clearer view of jaw structure may also get a cone beam CT scan. It adds a three-dimensional image that a flat x-ray cannot provide.
That combination is a digital scan of the teeth plus imaging of the jaw when needed. It is what separates a crowding case suited to aligners from a bite problem that needs the control braces offer. Dr. Proctor and Dr. Tanner provide Invisalign at Smiles By Design in Heber City. Patients from Midway, Park City, Kamas, and surrounding Wasatch County communities come in for exactly this kind of assessment. It happens before any tray or bracket is chosen. For a Spanish-speaking patient or family member, staff at the practice are able to walk through the same scan results in Spanish.
Weighing Comfort Against the Specific Problem
It is fair for comfort and appearance to matter once the scan and exam identify what is actually going on. Clear trays are easier to keep clean and easier to forget about during the day, and that matters for anyone weighing months of treatment. But comfort is a secondary question. The primary question is mechanical. Does this mouth need the kind of broad, multi-directional correction that wires provide? Or is it a spacing problem that a sequence of trays can resolve on its own? Starting from the wrong assumption, treating a bite problem as if it were simple crowding, is how people end up switching approaches partway through.
The real choice is not Invisalign versus braces in the abstract. It is whether a mouth has a space problem, a bite problem, or some mix of both. That answer comes from a scan and an exam, not from a preference for trays over wires.
-
Beauty7 years agoDeep Breathing Techniques To Change Your Life
-
Beauty7 years agoSix Essential Food Items For Runners
-
Featured7 years agoThere’s More To Weight Loss Than Dieting
-
Beauty7 years agoHealthy Choices To Help You Live Longer
-
Beauty6 years ago8 Ways to Prevent Acne Breakouts
-
Featured6 years agoTurn Your Extra Rice Into Something More
-
Featured6 years agoThe Fur-Parent’s Guide to Caring for Your Dogs During and After a Lockdown
-
Uncategorized7 years agoMicrosoft plans to reach negative carbon emissions by 2030 * Establishing $ 1 billion funds to find solutions
